Two Way Articulation Probe is used for Mitcorp industrial borescope and videoscope. This is a joystick used to view areas that would otherwise not be visible. A industrial endoscopes/borescopes is inserted into the item being evaluated without destroying the item of interest.
Borescopes are used to non destructively inspect industrial systems and equipment for condition, manufactured parts for quality and security and law enforcement for contraband, intelligence and safety. There are various manufacturers that offer industrial endoscopes with two way aritculation probe, as one of them, us, Shodensha would like to introduce our two way articulation in HD borescope Shodensha.
Contents
General
| SKU | Two-Way Articulation for Xseries |
| Weight | 0.000000 |
| Dimension | Ø4.5mm/ cable 1.5 or 3m |
| Manufacturer | Mitcorp |
| Two way Articulation Probe for | Videoborescope X500, X1000PLUS |
- 180 bending angle, more inspection areas.
- Smaller tube fulfills critical and advanced quality inspection.
- Full outer braided stainless steel tube provides superior durability abrasion, rusty and temperature resistance.
Application
Car, airplane, marine, locksmiths, electricians, law authorization, mechanics, exterminator plumbers, welders, carpenters, HVAC repair & inspect all kinds of hard-to-reach areas.
Two way Articulation Probe For Mitcorp Videoscope Specifications
| 4.5mm Two way articulation Probe | |
| Probe head diameter | 4.5mm |
| Probe head length | 4.5mm |
| Probe length | 1.5m, 3m |
| Articulation angle | right-left 180º |
| Probe head material | Stainless steel |
| Probe material | Outer braided Stainless steel |
| Light source | 5 x white LEDs |
| FOV | 90º |
| DOF | 1cm~10cm |
| Button | Snap shot, brightness+, brightness− |
| Working temperature | -10ºC~60ºC |
| Storage temperature | -10ºC~60ºC |
| Resolution | 640×480 |
| Applicable systems | X500, X1000PLUS |
| * Digital probe | Button:Snap shot, brightness +, brightness- Applicable systems: X series |
| * Analog probe | Button : boost，image rotation Applicable systems: F series |
Uses of Industrial Videoscope in our life
Industry
- Check the status of lightweight devices, make sure there are no problems when using them
- Clogged duct: when you use Industrial Endoscopes that help you quickly find clogged points and provide a quick solution.
- Cracked industrial lines: check and maintain the underground lines without dismantling and still achieve the most feasible results.
- Status in major waste lines: always know what condition the pipeline is in. how and to take corrective measures if something unexpected happens
- Ventilation pipes, air ducts: In large buildings, regular inspection helps us feel more secure while using. Take out timely handling measures when the pipes have a breakdown or damage.
Videoscope industry with two way articulation probe in mechanical manufacturing
- Check the quality of the goods after they are manufactured
- Check the bearing surface and parts, to keep the product quality in use
- Check the torsion of gears and pulleys: During use, the equipment will corrode over time, so the maintenance will help to always use the best results while operating the equipment. Do not worry about equipment parts affecting the working process
By air
- Check the blades for cracks or cracks while in use? Because the air pressure in the sky greatly affects the equipment. Just a small stain can also affect other parts. And if not, replace in time if the device is damaged to avoid an accident during use
- Foreign / loose micro parts: make sure the parts are in good use, not too overdue to ensure safety while using the device.
- Leakage from the lubricating line: helps us to detect and take corrective measures in time, avoid too much damage
Two way articulation probe for industrial Borescope inspects the inside of the car
- Check quality/reliability of cast goods while we are driving cars on the road
- Piston dome / cylinder / valve condition / motor / wiring
- Check for cracks, solder marks, chips, and contamination in the HP chamber
In everyday life
- Can be used to check civil equipment to know the use of the machine for timely repair
- Check around your house to avoid nesting of termites, birds, for chimney maintenance, … while simple, such checks ensure that your quality of life is enhanced.
In addition, it is possible to inspect the contents of the wall without dismantling the entire wall, resulting in very high repair costs.
Some notes when using equipment you need to know
– After using, you should clean immediately to ensure it is hygienic for the next use
– It is recommended to store the product in the box to avoid environmental factors on the device such as dust, rats, cables, damage to the device.
– Check the battery status before use so that the machine will not be interrupted during operation
– Check that the cable joints are always intact, avoiding breaking or cracking due to drops or strong impact.
– Always check the connection before making observations with the pipe check camera, it helps you to avoid flicker connection errors when using this device.
– Ensure the power source for the best performance, with some portable endoscope products that often use batteries, you need to pay attention to the battery power so that when using it is not interrupted and can be replaced when necessary. . This helps the machine run smoothly, without wasting your time
– Do not use the engine endoscopy while the engine is running.
– Do not use in places with high temperature and the vehicle’s rotating parts such as spark plugs, propellers …
– Do not use it in locations where there is oil or harsh cleaning chemicals.
– Do not use while charging can shorten battery life and may also lead to fire
– Do not bend the wire on the transducer too much, it will break the cable inside. Seriously affect the process of using the next time
– After use, they should be cleaned and kept in a cool, dry place. Do not use harsh cleaning chemicals to clean the product, even if the device is water-resistant
– Do not use force to impact the product, easily short-circuit the device and damage is inevitable
– When there is an error on the product that cannot be repaired voluntarily, please contact the nearest product supplier for quick repair and replacement.
– Do not use the machine in places where other devices are operating, causing injury to yourself and equipment loss.
If you want further information about X1000 PLUS HD borescope Shodensha, do not hesitate to contact us for details of products. With our detailed advisory, we commit to give customers best experience while working with us!
Contact:
Shodensha Vietnam Co., Ltd.
Address: HCM: 5th Floor, 178/8 Nguyen Van Thuong, Ward 25, Binh Thanh District, HCMC; HN: No.202, Y2 Building, HH04 Block, Viet Hung Urban Area, Giang Bien Ward, Long Bien District, Ha Noi City
Phone:HCM: +84(28)3911-2006; HN: +84(24)3200-3790
Fax: +84(28)3911-2007
Email: info@shodensha.com.vn
Youtube: Shodensha Thailand Co., Ltd. – YouTube
⭐⭐⭐⭐⭐ 4.9 / 5 ( 80 votes )
